(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• This timer is used when the week timer is set and for certain reasons the compressor must continue working,
for example, 1 hour, it can be set in this screen. This timer is prior to the Week Timer action.
(1) Week Timer
(2) Week action schemes
(3) Remaining Running Time
4.15 Test menu
Control panel
Menu icon, Test
Function
• To carry out a display test, i.e. to check whether the display and LEDs are still intact.
Instruction book
2920 7083 31 99
To Next Page
Loading...
