• Press the Enter button (13).
• The function of this screen is to activate the remote load/unload relay. To be able to activate this remote
Load/Unload functionality, a physical digital input with function Load/Unload is required.
Once this parameter is activated, the physical digital input can be used to switch the compressor between
Load and Unload.
3.30 Calling up/modifying protection settings
Available protections
A
number
of
protection
settings
are
provided.
The
protection
screens
are
labelled
<Pr.>.
The
pictograph
shown
with the protection screen indicates the purpose of the protection.
Possible combinations are <Pr.> followed by a number and one of the next pictographs:
Pictograph Designation
<Pr.> shown with the pressure pictograph shows the
pressure protections.
<Pr.> shown with the element outlet temperature
pictograph shows the element outlet temperature
protections.
<Pr.> shown with the dewpoint temperature
pictograph shows the dewpoint temperature
protections.
<Pr.> shown with the ambient temperature pictograph
shows the ambient temperature protections.
Following protection settings are available:
Instruction book
2920 7083 31 53
To Next Page
Loading...
