Atlas Copco GA 15

3.19 Calling up/modifying pressure band settings
Calling up the settings
Starting from the Main screen:
• Press Scroll button (12) until <P.04> is shown and then press Enter button (13). Pressure band 1 (<Pb.1>)
is shown on the display. Button (12) can be used to scroll to pressure band 2 (<Pb.2>).
• Press Enter button (13) on the desired pressure band. The load level of the selected pressure band appears.
Button (12) can be used to scroll to the unload level.
Instruction book
2920 7083 31 47