REPAIR
WARNING Risk of injury
Nonprofessional disassembly and assembly of the
hydraulic breaker may lead to serious injury and
property damage.
► Never pull the percussion unit out of the breaker
box. Dismounting the percussion unit is only
permitted if carried out by professionals trained
by Atlas Copco Construction Tools. These
professionals must follow all safety instructions
and guidelines for repair.
♦
For technical support contact the Atlas Copco
Customer Center/Dealer in your area.
Sending in the hydraulic
attachment for repairs
NOTICE Mixed hydraulic oil
Never mix mineral and non-mineral hydraulic oils!
Even small traces of mineral oil mixed in with
non-mineral oil can result in damage to both the
hydraulic attachment and the carrier. Non-mineral
oil loses its biodegradability.
► Only use one type of hydraulic oil.
♦
Always specify which hydraulic oil has been used
when sending in the hydraulic attachment to have
it repaired.
63© 2012 Atlas Copco Construction Tools GmbH | No. 3390 5005 01 | 2012-05-03
Original instructions
REPAIRHB 5800, 5800 DP, 7000, 7000 DP, 10000 DP
To Next Page
Loading...
Need help?
General
