Atlas Copco TPS Control - Page 34

User guide EN TPS Control
34
© Atlas Copco Industrial Technique AB - 9836 5819 01
Parameter name Description Range/Values
C2:data bits Allows you to set the data byte length for the barcode
reader interface
7, 8
Default: 8
C2:parity Enables the definition of the parity method for the bar-
code reader interface
None, even, odd
Default: None
Display set up
Parameter name Description Range/Values
Display contrast Adapts the display contrast to the surroundings 30-63
Default: 48
Screen saver (min) Sets the time limit for the idle period before the
screensaver is activated.
Off, 1-15 minutes
Default: 6
RGB portion Red Sets a fixed percentage value to specify the amount of
red, green and blue colour in the display backlight. For
example, for a completely white backlight, set
Red=100%, Green=100%, and Blue=100%. For a
pure red backlight, set R=100%, G=0%, and B=0%.
25%
37%
50%
62%
100%
Default: 50%
RGB portion Green See RGB portion Red 25%
37%
50%
62%
100%
Default: 50%
RGB portion Blue See RGB portion Red 25%
37%
50%
62%
100%
Default: 50%