- 29 -
TOWING INSTRUCTIONS For both non-adjustable - and adjustable
towbar, the towbar should be as level as
possible and the compressor and towing
eye end in a level position.
1. Attach the compressor to the towing
vehicle.
2. Move hand brake lever (1) in the
direction of the arrow till stop.
3. Secure the support leg (2) in the highest
possible position.
Never move the compressor with air hoses
connected to the air outlet valves.
LIFTING INSTRUCTIONS
To lift the compressor, use a lift truck or
crane with sufficient capacity (weight: see
indication on Dataplate).
See to it that the compressor will be lifted
vertically and remains level.
Before towing the compressor,
ensure that the towing
equipment of the vehicle
matches the towing eye.
Switch of the compressor, before
moving.
Lifting acceleration and
retardation must be kept within
safe limits (max. 2xg).
Helicopter lifting is not allowed.
Lifting is not allowed when the
unit is running.
To Next Page
Loading...
