- 46 -
BATTERY MAINTENANCE
• Keep the battery clean and dry.
• Keep the electrolyte level above the
plates or at the indicated level. Level
above plates at least 10 mm (0.4 in) to
15 mm (0.6 in). Top up with distilled
water only.
• Keep the terminals and clamps tight,
clean, and lightely covered with
petroleum jelly.
COMPRESSOR ELEMENT
OVERHAUL
When a compressor element is due for
overhaul, it needs to be done by Atlas
Copco. This guarantees the use of genuine
parts and correct tools with care and
precision.
To Next Page
Loading...
