ATN Zebra 16 - Regulations; 5.1 Suitability for Use Compliance; 5.2 Workplace Inspection Requirements; 5.3 Periodic Inspection Schedule

OPERATOR’S AND SAFETY HANDBOOK
1NO0060EN-00
Zebra 12 – Zebra 16
58
5.1 SUITABILITY FOR USE
- Compliance with machine directive 2006/42/EC.
- Initial inspection report provided with the machine.
5.2 INSPECTION OF THE WORKPLACE
- Before using the machine, never forget to check the machine suits to the workplace. This
verification must be done by the user of the machine.
5.3 PERIODIC INSPECTION
- Every 6 months, the machine must be check by an approved agency.