This machine is a Mobile Elevating Work Platform designed to take personnel, tools, and
NECESSARY materials to carry out work FROM the platform to a workstation at height. Please
contact the manufacturer for any information on a specific use or work condition.
The machine is fitted with a main control station on the work platform which is used to control
the elevation and drive movements. All the movement activation/validation has to be done with
the foot pedal located on the work platform.
A priority control station on the ground is used to raise or lower the platform in the event of an
emergency when the operator on the work platform is unable operate the machine. Except for
emergencies, the ground control station must not be used when people are on-board the work
platform.
Read the safety instructions in Section 2 of this manual before using the machine.
4.1 CONTROLS AND INDICATORS
4.1.1. GROUND CONTROL STATION
Zebra 12
To Next Page
Loading...
Need help?
General
