Shenzhen AtomStack Technologies Co., Ltd. support@atomstack3d.com
1. AtomStack A5 Engraver Introduction
The AtomStack A5 laser engraving can be used for engraving, and
cutting.
The AtomStack A5 laser engraver uses a fixed-focus laser, traditional
lasers are zoom lasers and require to look directly at the laser spot to find a
proper size. The AtomStack A5 laser is a fixed-focus laser, it only need a
fixed-focus sheet to get the best engraving focal length.
The laser shield helps us block most of the bright light, if we look
directly at them, firstly the retina will be damaged and your vision will be
reduced, secondly it will cause visual fatigue, decreasing productive and
leaning efficiency. Thirdly, the light can inhibit the production of
melatonin, which affects the quality of sleep. The laser shield can help to
protect you from this damage.
The AtomStack laser engraver has a laser power of 5W, and it can cut
some boards and engrave on stainless steel easily.
AtomStack A5 engraver supports PWM control (Pulse Width
Modulation), which makes the engraved pattern more detailed.
To Next Page
Loading...
Need help?
General