Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Screw out hexagon bolt -1- at battery bracket -2-.
- Pull battery out of fastening strip of battery bracket.
- Lift battery out of engine compartment.
- Install battery => Page 7 .
1.6 - Installing battery
Note:
Batteries from the Audi parts range feature a base strip adapter for matching to different fastening strips.
When and how the base strip adapter is to be used is described in the battery operating instructions.
- -> Insert battery in battery carrier such that lug of battery carrier at rear -arrow- engages in recess in battery
base strip -1-.
- It should no longer be possible to move battery
- -> Battery has been properly inserted if centre recess in battery base strip coincides with tapped hole in
battery carrier -arrows-.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
1.5 - Removing battery - Audi S3 7
To Next Page
Loading...
