Audi A3 1997 - Multi-Pin Connectors at Dash Panel Insert

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Midline dash panel insert
1 - -> Main beam warning lamp
2 - Electronic stability program (ESP) warning lamp (only if ESP fitted)
3 - Trailer turn signal indicator lamp (only if trailer coupling fitted)
A - Blue 32-pin connector for basic functions
B - Green 32-pin connector for additional functions
C - Cover panel for vehicles with no ambient temperature display
Note:
Cover panel -C- is to be removed if dash panel insert is replaced on vehicles with ambient temperature display
or if ambient temperature display is retrofitted.
Highline dash panel insert
1 - -> Main beam warning lamp
2 - Electronic stability program (ESP) warning lamp (only if ESP fitted)
3 - Trailer turn signal indicator lamp (only if trailer coupling fitted)
A - Blue 32-pin connector for basic functions
B - Green 32-pin connector for additional functions
C - Red 20-pin connector for driver information system (DIS)
1.6 - Multi-pin connectors at dash panel insert
Audi A3 1997 ➤
Electrical system - Edition 10.2003
1.5 - Assignment of dash panel insert lamps - as of Model Year 1998 51