Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Unscrew nuts -1 ... 5-.
- Lay bare wires.
- Detach fuse box for main fuse.
Note:
-> Precise assignment of fuse box can be seen from appropriate current flow diagram.
=> Current Flow Diagrams, Electrical Fault-finding and Fitting Locations binder
Installing
Install in reverse order.
Tightening torque
Component Nm
Wire to fuse box 6
1.3 - Removing and installing fuse box
Audi A3 1997 ➤
Electrical system - Edition 10.2003
190 97 - Wiring
To Next Page
Loading...
