Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.4 - Removing and installing spray jet
Removing
- -> Carefully prise off cap -1- of spray jet -arrow-.
- Pull spray jet -2- out of connection pipe.
Installing
Install in reverse order, paying attention to the following:
- Insert spray jet such that opening is facing upwards.
3.5 - Adjusting spray jet
Special tools and workshop equipment required
◆ Adjustment tool for wiper jet
3125 A fitted with needle 3125 / 5A
Audi A3 1997 ➤
Electrical system - Edition 10.2003
84 92 - Windscreen wipe and wash system
To Next Page
Loading...
