Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Vehicles with petrol engine:
- Unscrew activated charcoal filter -3-.
Note:
Leave hoses connected.
Vehicles with TDI engine:
- -> Unscrew fuel filter bracket from body -4-. Leave hoses connected to fuel filter.
All models:
- Unplug connectors -2- and -5-.
- Unscrew bolt -1- and nut -3-.
- Unplug connectors -2- and -5-.
- Lift out washer fluid reservoir.
Installing
Install in reverse order, paying attention to the following:
Note:
Fluid hose must be heard to engage in washer fluid pump connection.
Tightening torques
Component Nm
Washer fluid reservoir to body
2.5
Coolant expansion tank to body 10
Activated charcoal filter to body 10
Fuel filter to body 10
2.3 - Removing and installing spray jets
Audi A3 1997 ➤
Electrical system - Edition 10.2003
2.2 - Removing and installing washer fluid reservoir 75
To Next Page
Loading...
