Audi A3 1997 - Removing and Installing Switches in Centre Console - as of Model Year 2001

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
=> General Body Repairs, Interior; Repair Group 68
1.3 - Removing and installing switches in centre console - as of Model Year 2001
Removing
- Remove radio/monitor navigation system.
=> Radio, Telephone, Navigation; Repair Group 91
- -> Unclip trim for switch module -arrows-.
- Detach trim for switch module.
- -> Use flat screwdriver to carefully prise corresponding switch out of mount -arrows-.
- Unplug connector.
Installing
Install in reverse order, paying attention to the following:
- Plug in connector.
- Press switch into mount in dash panel and engage.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
160 96 - Lights, Lamps, Switches - interior