Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Note:
Use adhesive tape to stop wing becoming scratched.
Detaching wiper motor from wiper frame
- Use pressing-off lever 80-200 to prise wiper linkage off ball end
-arrow-.
- -> Unscrew nut -2-.
- Pull crank -1- off wiper motor.
- -> Unscrew wiper motor from wiper frame -arrows-.
Installing
Install in reverse order, paying attention to the following:
- -> Screw wiper motor without crank to wiper frame (9 Nm) -arrows-.
- Attach connector to wiper motor.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
70 92 - Windscreen wipe and wash system
To Next Page
Loading...
