Audi A3 1997 - Page 128

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Reading measured value block
2 - Display zone 1
Display zone 2
Display zone 3
Display zone 4
3 - Display group X
Notes:
◆ Display remains blank if a display zone is not used.
◆ Proceed as follows to switch to a different display group:
Display group VAS 5051
Up Press s key
Down Press t key
- Terminate function "08 - Reading measured value block" by touching◂key.
List of display groups
Display group
number
Indicated on display
020 1 = 1st and 2nd ident no. position
2 = 3rd and 4th ident no. position
3 = 5th and 6th ident no. position
4 = 7th and 8th ident no. position
021 9 = 9th and 10th ident no. position
2 = 11th and 12th ident no. posi‐
tion
3 = 13th and 14th ident no. posi‐
tion
4 = Not used
022 1 = Starting authorised
2 = Engine control unit response
3 = Key status OK
4 = Not used
Measured value block 020
Display group 20 ◂ Indicated on display
AU Z7 Z0 T0 ◂ Display zones 1 ... 4
7th and 8th ident no. position
5th and 6th ident no. position
3rd and 4th ident no. position
1st and 2nd ident no. position
Measured value block 021
Display group 21 ◂ Indicated on display
03 38 77 - ◂ Display zones 1 ... 4
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
122 01 - Self-diagnosis