Audi A3 1997 - Reading Measured Value Block

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Vehicle-system encoding completed
2 - Control-unit identification with new code
(old code in brackets)
- Terminate function "07 - Encoding control unit" by touching ◂ key.
8.9 - Reading measured value block
Sequence of operations
- Start parking aid self-diagnosis => Page 209 .
-> Display on VAS 5051:
- From list -1- select diagnosis function "08 - Reading measured value block".
-> Display on VAS 5051:
1 - Enter display group
- Use keypad -2- to enter required three-digit display group number
=>List of display groups, Page 218 and confirm entry by touching Q key.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
8.8 - Encoding control unit 217