EasyManua.ls Logo

Audi A3 1997 - Control Unit Release

Audi A3 1997
245 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Is entered and transferred Yes
vehicle ident. no.
XXXXXXXXX
No
to be saved?
Vehicle ident. no. forms the first
17 positions in the identification
Once saved, vehicle ident.
number can no longer be changed
Meas. method Skip Print Help
- Check entry and then touch "Yes" key.
- Incorrect vehicle ident. no. entry can be corrected by touching "No" key.
t Display on VAS 5051
Vehicle self-diagnosis 17 - Dash panel insert
8L0920900
Functional test
DASH PANEL INSERT+IMMOBILIZER M73 D06
Vehicle ident. no. transfer
Code 8140
Dealership number 12345
Saving of vehicle ident. no.
Transfer successfully completed Ready
Conclude function with Ready key
Meas. method Skip Print Help
- Touch "Ready" key.
- Then perform matching for all vehicle keys => Page 176 .
This completes adaption/matching of dash panel insert, engine control unit and vehicle keys and vehicle can
be started.
6.16 - Control unit release
Note:
New/old dash panel inserts or old engine control unit must always be released.
Requirements:
Vehicle diagnostic, testing and information system VAS 5051 connected up and vehicle self-diagnosis se‐
lected => Page 1
Ignition on
Audi A3 1997
Electrical system Self-diagnosis - Edition 02.2002
6.15 - Adaption following replacement of dash panel insert and engine control unit
195

Table of Contents

Other manuals for Audi A3 1997

Related product manuals