Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Basic setting
2 - Display group 2
3 - Control position learnt
- Control unit now recognises this position as being the control position
Note:
Entry in fault memory ("Headlights not adjusted") is erased and control mode re-activated.
- Terminate function "04 - Basic setting" by touching ◂ key.
9.8 - Erasing fault memory
Note:
If fault memory cannot be erased, interrogate fault memory again and eliminate fault.
Requirements:
• Fault memory interrogated => Page 226
• All faults eliminated
Sequence of operations
After fault memory interrogation:
-> Display on VAS 5051:
- From list -1- select diagnosis function "05 - Erasing fault memory".
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
9.7 - Basic setting 233
To Next Page
Loading...
