Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5.7 - End of output
Sequence of operations
-> Display on VAS 5051:
- From list -1- select diagnosis function "06 - End of output".
-> Display on VAS 5051:
- Switch off ignition and unplug diagnostic connector when this display appears.
5.8 - Reading measured value block
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
146 01 - Self-diagnosis
To Next Page
Loading...
