Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Actuation of illumination/switches and instruments
- Touch ▸ key.
-> Display on VAS 5051:
A - 6th control element being tested
6 - Illumination/switches and instruments
◆ Dash panel insert illumination is dimmed, becomes brighter, is then dimmed again and finally returns to
original brightness level
- Touch ▸ key.
-> Display on VAS 5051:
A - Control element test over
- Terminate function "03 - Final control diagnosis" by touching ◂ key.
3.7 - Erasing fault memory
Note:
If fault memory cannot be erased, interrogate fault memory again and eliminate fault.
Requirements:
• Fault memory interrogated => Page 49
• All faults eliminated
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
58 01 - Self-diagnosis
To Next Page
Loading...
