Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Vehicles as of Model Year 2000:
- -> Use diagnostic wire VAS 5051/1 to connect up vehicle diagnostic, testing and information system VAS
5051.
All models:
Note:
If fault message appears on display:
=> Operating instructions for vehicle diagnostic, testing and information system VAS 5051
-> Display on VAS 5051:
- Touch "Vehicle self-diagnosis" key.
-> Display on VAS 5051:
Note:
Touching "00 - Interrogating fault memory - entire system" in list -1- implements the automatic test sequence,
i.e. fault memory interrogation takes place for all vehicle systems with self-diagnosis capability.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
1.3 - Connecting up vehicle diagnostic, testing and information system VAS 5051 and
selecting functions 3
To Next Page
Loading...
