Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4.8 - Reading measured value block
Sequence of operations
- Start immobilizer self-diagnosis => Page 114 .
-> Display on VAS 5051:
- From list -1- select diagnosis function "08 - Reading measured value block".
-> Display on VAS 5051:
1 - Enter display group
- Use keypad -2- to enter required three-digit display group number
=>List of display groups, Page 122 and confirm entry by touching Q key.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
4.8 - Reading measured value block 121
To Next Page
Loading...
