Audi A3 1997 - 3.1 - Interrogating fault memory

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Sequence of operations
- Start dash panel insert self-diagnosis => Page 4 .
-> Display on VAS 5051:
- From list -1- select diagnosis function "02 - Interrogating fault memory".
-> Display on VAS 5051:
1 - Content of fault memory:
- 0 faults detected
Or
- X faults detected
2 - Fault
- Fault code
- Fault location
- Type of fault
A - Faults detected:
- Print out information on screen or self-diagnosis log.
- Terminate function "02 - Interrogating fault memory" by touching
◂ key.
-> Display on VAS 5051:
- Eliminate fault(s) in line with fault table => Page 8 .
- Select diagnosis function "02 - Interrogating fault memory" again in list and erase fault memory => Page
13 .
- Select diagnosis function "06 - End of output" in list => Page 15 .
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
2.4 - Interrogating fault memory 7