Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Channel 1
Read and test
4 - Moving bar positioned on current adaption value
Volume Low ... High
Adaption value 2 3 4 5 6 7
-> Display on VAS 5051:
- Enter desired volume adaption value.
Example: Adaption value 4 for mid volume
- Shift moving bar -5- in required direction or touch area next to bar until it is positioned under number "4" (ex‐
ample).
Note:
Another alternative is to touch "Keypad" key -3-, enter number "4" on keypad and confirm entry by touching Q
key.
- Touch "Save" key -4-.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
8.10 - Adaption 221
To Next Page
Loading...
