Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
- Switch off ignition and unplug diagnostic connector when this display appears.
9.10 - Encoding control unit
Note:
The encoding adapts the universal headlight range control unit to the particular requirements of the vehicle
concerned.
Sequence of operations
- Start automatic headlight range control self-diagnosis=>Page 225 .
-> Display on VAS 5051:
- From list -1- select diagnosis function "07 - Encoding control unit".
-> Display on VAS 5051:
1 - Enter code word
- Use keypad -2- to enter control unit code as per encoding table.
Code Type of vehicle/type of drive
00001 A3 FWD
Up to Model Year 2000
00002 A3 4WD/S3
Up to Model Year 2000
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
9.9 - End of output 235
To Next Page
Loading...
