EasyManua.ls Logo

Audi A3 1997 - Page 58

Audi A3 1997
245 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Display on VAS 5051 Possible cause of trouble Fault remedy
Coolant temperature gauge sender -G2
- Open circuit/short to positive
- Short to earth
- Open circuit in wiring or short
circuit
- Use current flow diagram to per‐
form fault-finding
- -G2 defective - Replace -G2
Display on VAS 5051 Possible cause of trouble Fault remedy
01300
Nav. with CD drive control unit
- No communication - Open circuit in wiring or short circuit - Use current flow diagram to perform
fault-finding
- Incorrect control unit, i.e. no CAN ca‐
pability
- Replace control unit with one featur‐
ing CAN capability
- "1" not displayed in measured value
block 140 for navigation control unit
=>Page 70
- Dash panel insert adaption not per‐
formed correctly
- Select adaption channel 62 and en‐
ter correct adaption value => Page
105
Display on VAS 5051 Possible cause of trouble Fault remedy
01302
Telematic control unit
- No communication - Open circuit in wiring or short circuit - Use current flow diagram to perform fault-
finding
- Incorrect control unit, i.e. no CAN capabil‐
ity
- Replace control unit with one featuring
CAN capability
- "1" not displayed in measured value block
140 for telematics control unit =>Page
70
- Dash panel insert adaption not performed
correctly
- Select adaption channel 62 and enter
correct adaption value => Page 105
Display on VAS 5051 Possible cause of trouble Fault remedy
01303
Telephone transmitter/receiver unit
- No communication - Open circuit in wiring or short circuit - Use current flow diagram to per‐
form fault-finding
- Incorrect control unit, i.e. no CAN
capability
- Replace control unit with one fea‐
turing CAN capability
- "1" not displayed in measured value
block 140 for telephone control unit
=>Page 70
- Dash panel insert adaption not per‐
formed correctly
- Select adaption channel 62 and
enter correct adaption value =>
Page 105
Display on VAS 5051 Possible cause of trouble Fault remedy
01304
Radio
- No communication - Open circuit in wiring or short circuit - Use current flow diagram to perform fault-
finding
- Incorrect control unit, i.e. no CAN capability - Replace control unit with one featuring
CAN capability
Audi A3 1997
Electrical system Self-diagnosis - Edition 02.2002
52 01 - Self-diagnosis

Table of Contents

Other manuals for Audi A3 1997

Related product manuals