Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter desired adaption channel =>Adaption table, Page 72 .
- Confirm entry by touching Q key.
Note:
After changing adaption value/following termination of an adaption channel, function "10 - Adaption" must be
selected again to select a different adaption channel.
-> Display on VAS 5051:
1 - Channel X
Read and test
2 - Text display for channel selected
or
No display
4 - Moving bar positioned on current adaption value
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
3.11 - Adaption 73
To Next Page
Loading...
