Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
It is displayed after the automatic gearbox info and after entering destination for navigation system where
appropriate. Display: "SERVICE!"
◆ Information on applicable specifications:
=> Maintenance
◆ Channels 40, 41, 46, 47 and 48, which display dynamic service values, are set automatically to "0".
-> Display on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "02" for "Adaption channel 02" and confirm by touching Q key.
-> Display on VAS 5051:
1 - Channel 2
Read and test
4 - Moving bar positioned on current adaption value
Display Significance
0 Service not due
1 Service due
Service status is reset by way of the following adaption value:
Adaption value Service status
00000 Cancel service
- Use moving bar to change adaption value =>"A - Changing adaption value with moving bar", Page 74 .
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
3.11 - Adaption 77
To Next Page
Loading...
