LL
co
....
N
"
N
....
0
N
>
co
Driving in stop-and-go traffic
Applies to: vehicles with Audi adaptive cruise contro l
Fig. 129 Instr ument clust er: safe star t mo nitor
The adaptive cruise control system assists you in
stop -and -go traffic . If a vehicle that is detected
ahead stops, your vehicle will brake and stay at a
stop , within the limits of the system.
.,. To resume driving with adapt ive cruise control,
tap the accelerator pedal or
.,. Pull the lever toward you into position @
¢ page 127 , fig . 130.
Starting to drive with adapti ve cruise
controt
1
>
As long as the message ACC: automatic go is dis-
played and the objec t detected ahead starts to
move, your veh icle will contin ue d riving ~ .&.. You
can act ivat e
ACC: automatic go again for a sho rt
time by pu lling the lever to position @ .
The
ACC: autom atic go sta rt mode ends whe n
the brake pedal is pressed.
For safety reasons, your vehicle will only start to
drive automatically if:
- the driver 's safety belt is fastened
- all doors and the hood are closed
-your vehicle is no t stationary for mo re than
t hree m inutes
Safe start monitor
If an obstacle is detec t ed when you sta rt d riving,
you will be a lerted to the danger by the . ind i-
cator ligh t and the image in the instr ument clus-
ter disp lay ~
fig. 129 ¢ .&.. An aud io signal will
also sound . Your veh icle will drive more s lowly
l) This is not ava ilable in some count ries.
A s si s t a nce systems
when starting . This may also happen in some sit-
uations when there is no apparent obstacle.
- Press t he bra ke pedal t o slow your vehicle
down.
_& WARNING
~
If the message ACC: automatic go
1
> appears,
your vehicle will start driving even if there is
an obstacle between your vehicle and the ve-
hicle driving ahead. This increases the risk of
an accident.
(D Tips
If adaptive cruise control is active and your
vehicle does not start dr iving even though the
message
ACC: automatic go
1
> appears, yo u
can start driving by tapping the accelerator
pedal.
Interrupting cruise control
Applies to : vehicles wit h Audi ada ptive cruise control
Fig. 130 Operat ing lever
Requirement: adaptive cruise control must be
switched on.
Overriding cruise control
.,. To accelerate man ua lly, pull the lever toward
you into position @ and hold it there, or press
the acce lerator pedal. The message ACC: over-
ride
appears.
.,. To resume cruise contro l, re lease the lever or
take your foot off the accelerator pedal. .,..
127
To Next Page
Loading...
