u.
00
.-<
N
l'-
N
.-<
0
N
>
00
System settings
Setting the date and
time
You can set the clock time manually or using the
CPS*.
.. Select : IMENUI button> Settings> left control
button >
MMI settings > Date & time.
.. Or:
select : IMENUI button> Vehicle> left con-
trol button >
Vehicle settings > Date & time .
Automatic setting
When this function is switched on g, the time
and date are automatically set.
Time
Requirement: the Automatic setting must be
switched off .
Press the control knob. You can set the Time
manually by turning and pressing the control
knob.
Date
Requirement: the Automatic setting must be
switched
off.
Press the control knob. You can set the Date
manually by turning and press ing the control
knob.
Time zone
When selecting the appropriate time zone, a
sampling of countries in this zone will be listed .
Automatic time zone*
When this function is switched on g, the time
will automatically adjust to the corresponding
time zone.
Automatic daylight saving time*
When this function is switched on g, the time
will automatically switch to daylight saving time .
Time format
If you select 24h, the clock will display, for ex-
ample,
13:00 . If you select AM/PM , the clock
will disp lay, for examp le, 1:00 PM .
System settings
Date format
If you select DD.MM.YYYY , the date display will
show, for example ,
31.08.2017. If you select
MM/DD/YYYY , the date display will show, for ex-
amp le,
08/31/2017. If you select YYYY-MM-
DD,
the date display will show, for example,
2017-08-31 .
MMI settings
.. Select: ! MENU I button> Settings> left control
button >
MMI settings .
Language
You can change the display language as well as
the language for the voice guidance* and voice
recognition system*.
The number of languages available depends on
the market.
Measurement units
The following measurement units can be set de-
pend ing on availability:
Speed, Distance, Tem-
perature, Fuel consumption, Volume , Pressure.
Tool tips
When this funct ion is switched on g, your MMI
shows you tips for input . The frequency of how
often it displays decreases with time .
Speech dialog system
App li es to : vehicles wit h voice recog nit ion system
Depending on vehicle equipment, the following
funct ions may be available:
Command display: when this function is switch-
ed on
g, the MMI will show you the possible
commands for voice input in the respective
menu.
Short dialog : when this function is switched on
g, a shorter form of the prompts is used .
Command during voice output*: t his function is
switched on at the factory . When this function is
switched on
g, you can say new commands dur-
ing announcements. You do not need to wait for
the signal tone (beep) during an announcement.
When the funct ion is switched off
0, you need to Iii>
243
To Next Page
Loading...
