Multi Media Interface
Requirement: a map must be disp layed
r::!>page 210.
- Showing/hiding the crosshairs: press the con-
trol knob to show the crosshairs
CD¢ fig. 161.
Or: press on the MMI touch control pad. Press
the I BACKI button
(J) r::!> page 154, fig. 154 to
hide the crosshairs again .
- Moving the crosshairs on a map: move the
crosshairs shown in the desired direction using
your finger on the
MMI touch control pad
c>fig. 161.
Moving the crosshairs quickly: when the cross-
hairs are visible
CD c> fig . 161, slid e your finger
quickly across the
MMI touch contro l pad in the
desired direction
c> fig. 161. The crosshairs w ill
come to a stop after several seconds.
Moving the map
Applies to: vehicles with MMI touch
I~
''
S F1ouwro4 St
Fig. 16 2 Moving the map
Requirement: a map must be disp layed
r::!> page 210 .
l ) AUDI AG provides access to services from thir d party pro -
viders. Permanent availabili ty cannot be g uaranteed , be-
cause that depends on the th ird party provider.
158
- Showing/hiding the crosshairs: press the con-
trol knob to show the crosshairs
CD c> fig. 162 .
Press the I BACK I button (J) r::!> page 154,
fig. 154 to hide the crosshairs again.
- Moving the standard map/satellite map
1
l:
move the crosshairs shown in the desired direc-
tion using two fingers on the
MMI touch con-
trol pad
c> fig. 162.
- Moving the map quickly: when the crosshairs
are visible, pull two f ingers across the
MMI
touch control pad quickly in the desired direc-
tion. The map w ill come to a stop after several
seconds.
Zooming in/out on the map
Appli es to: vehicles with MMI to uch
Fig. 163 Zoom ing in and out on th e map
Requirement: a map must be displayed
r::!>page 210.
- Zooming in/out on the map : press the control
knob to show the crosshairs. Touch the
MMI
touch control pad with two fingers and pull
your fingers apart or together
r::!>fig . 163.
Press the I BACKI button (J) to hide the crosshairs
c>page 154 , fig . 154.
Adjusting the sound focus
Applies to: vehicles wit h MMI to uch
Requirement: the balance/fader function must
be selected
r::!> page 247. ..,.