Lights and Vision
Adjusting the magnetic zone
Applies to: vehicles with digital compass
The magnetic zone must be adjusted correctly for the compass to read accurately.
Fig. 61 Magnetic zone map
~
Press and hold the button CD~ page 57, fig. 60
until the number of the magnetic zone appears
in the interior rearview mirror.
~
Press the button CD repeatedly to select the
correct magnetic zone . The selection mode
turns off after a few seconds.
Calibrating the compass
Applies to: vehicles with digital compass
If the display is incorrect or inaccurate, the com-
pass must be recalibrated.
~
Press and hold the button CD until a "C" ap-
pears in the interior rearview mirror.
~
Drive in a circle at about 6 mph (10 km/h) until
a dir ect ion is displayed in th e interior rearview
mirror.
58
A WARNING
To reduce the risk to yourself and other driv·
ers, calibrate the compass in an area where
there is no traffic.
To Next Page
Loading...
