& WARNING (continued)
• Make sure that ESP remains enabled. With the ESP disabled,
the vehicle could brake away, particularly on a slick and slippery
road - risk of skidding!
• Once acceleration is finished, switch ASR on again by briefly
pushing the ESP button. •
Back-up program
In the event of a system malfunction, there is an back-up
program.
In the event of system malfunction, the automatic transmission
switches to the fail-safe mode. All of the selector lever position
displays for the automatic transmission are highlighted with a light
background in the instrument cluster display . In some cases you
cannot use reverse gear any more.
If the transmission switches to fail-safe mode, you should take the
vehicle to an authori zed Audi dealership as soon as possible to have
the condition corrected. •
Cont rols and equip-
ment
Vehicle OP-eration
Transmission
Selector lever emergency release
If the vehicle's power supply fails, the selector lever can
be released in an emergency.
Fig. 89 Selectorlever:
Removing the selector
lever boot
Fig. 90 Selector lever:
Using the emergency
release to move out of
the Park position
The emergency release mechanism is located in the right
front area under the selector lever shift gate. Using the emer-
gency release can be complicated. We recommend
contacting your authorized Audi dealer for assistance, if
necessary.
Removing the selector Lever boot
- Activate the parking brake.
Vehicle care Do-it-yourselt service iTechnical data
To Next Page
