1/10 of a mile (100 meters) . You can set the trip odometer back to
zero by pressing the reset button => fig.
4 .
With the ignition off, pushing of the Set/Check button => page 8,
fig. 2 ® can turn on the display field lighting for a few seconds.
Malfunction message
If there is a malfunction somewhere in the instrument cluster, dEF
w ill appear in the trip odometer and will stay on . Contact your autho·
rized Audi dealer to have the problem corrected .
Immobilizer
When the ignition is switched on, the data on the ignition key are
scanned automatically .
If an unauthorized key was used, SAFE is displayed continuously in
the odometer disp lay field . The vehicle cannot be operated
:::>page 38.
[ i ] Tips
• The digital clock and the odometer are turned on for about 30
seconds when the driver's door is opened.
• When the ignition is tu rned off, the odometer reading and the
dig ita l clock with date display can be sw itched on for about
30 seconds by pressing the Set/Check button => page 8, fig . 2 ®· •
Cont rols and equip·
ment
Vehicle OP-eration
Instruments and warning / indicator lights
Warning/indicator lights
Overview
The warning/indicator lights indicate different functions
or a possible malfunction.
Fig. 5 Instrument cluster w ith warning/indicator lights
Audi magnetic ride
Tire pressure too low
Electronic power control
=>
page 12
=> page 13
=> page 13
Electronic Stabilization Program (ESP) ::::, page 13
USA models: => page 13
Malfunction Indicator lamp (Mil)
Vehicle care Do-it-yourselt service
-
iTechnical data