Audi TT Platform 2009 - Sealing Flange - Tightening Sequence; Flywheel;Drive Plate - Tightening Torques

Engine Mech., Fuel
Injection & Ignition
Audi TT Quick Reference Specication Book • May 2009 23
Sealing Flange – Tightening Sequence
Step Component Nm
1 Tighten bolts 1 – 8 in sequence Hand tighten
2 Tighten bolts 1 – 8 in sequence 9
Flywheel/Drive Plate – Tightening Torques
Component Nm
Flywheel/drive plate to cylinder block bolt 60 plus an
additional 90°
(¼ turn)
Dual-mass ywheel to crankshaft 60 plus an
additional 90°
(¼ turn)
Sensor wheel to crankshaft bolts 10 plus an
additional 90°
(¼ turn)