38
Talkback Source
The Talkback source allows the talkback input
to be taken from one of the iD44’s internal
inputs or from a device connected to the host
computer (such as a built-in microphone or
USB microphone).
When you select an input as your Talkback
channel, the channel strip in the iD mixer will
be changed to a talkback channel which will
have a TB button in the centre.
If using an external device, the talkback signal
will appear on channel DAW 10.
Faders will only appear for these channels on
the Cue mixes, not on the Main Mix.
Talkback Device
If an external device is selected then this allows
you to select which connected device is used.
To Next Page
Loading...
