23
Using the product
Adjusting the input gain
Adjust the volume of the input sound from the microphone input jack and line input jacks. Use the gain control knobs
(GAIN) to make these adjustments.
1
While outputting sound from the microphone or instrument, turn the gain control knobs (GAIN) to
the left and right to adjust the volume.
Turn a knob to the left to decrease the volume and to the right to increase the volume.
Indicator lamps
When the level of the sound output to a device is −15dBFS or higher, the signal indicator lamps (SIG) light in green.
If the peak indicator lamps (PEAK) light frequently, decrease the gain to the point that the lamps light only for an
instant at the maximum input.
To Next Page
Loading...
Need help?
General
