Audio Technica AT-UMX3 User Manual

Using the product
28
Supplying phantom power to the microphone input jack
When a condenser microphone is connected to the microphone input jack, perform the following operation to supply
+48V DC phantom power to the XLR plug of the microphone input jack. The following operation is not necessary if a
dynamic boom microphone is connected.
1
Slide the phantom power switch to the +48V side.
If a microphone not compatible with a phantom power supply is connected, do not set the phantom power
switch to the +48V side. Doing so may damage the microphone.

Audio Technica AT-UMX3 Specifications

General

Brand	Audio Technica
Model	AT-UMX3
Category	Music Mixer
Language	English