AudioArts Engineering audio console r-55e - Power Connections

page 2 – 5
R-55e / July 2004
QUAD MIC PREAMP
Power Connections (CT7)
A ribbon cable connects the 10-pin connector on the QMP-4 (CT7) to the
10-pin connector mounted on the center of the MBR-2000 motherboard
(CT8) or MBR-55 motherboard (CT18) to provide power to the microphone
preamplifier.
Pin 1 – Analog Ground
Pin 2 – Analog Ground
Pin 3 - +Phantom V
Pin 4 – +Phantom V
Pin 5 – +V In
Pin 6 – +V In
Pin 7 – -V In
Pin 8 – -V In
Pin 9 – Analog Ground
Pin 10 – Analog Ground