AudioCodes Mediant 1000B - Step 9: Configure Coders

Configuration Note 5. Gateway Configuration
Version 6.8 27 Mediant 1000B
5.11 Step 9: Configure Coders
This step describes how to configure coders.
 To configure coders:
1. Open the 'Coders Table' page (Configuration tab > VoIP > Coders and Profiles >
Coders).
Figure 5-15: Coders Table
2. From the 'Coder Name' drop-down list, select G.711U-law.
Note: Configure the Coders table to contain only G.711U-law.
3. Click Submit.