3:
Getting
Started
Page
5
Introduction
of
Omnia
Welcome to the Audiolab Omnia - a ground-breaking, all-encompassing audio
solution with
an
integrated amplifier,
CD
player, wireless streaming player,
DAC,
headphone amplifier and pre-amplifier - in one single unit!
Featuring
DTS
Play-Fi
technology, music
can
be
streamed over your wireless
network
in
high-resolution
format
and can be easily expanded
to
a
multi-room system
if
required.
You
can
stream from any source on your wireless
network, including smartphones, tablets
or
PCs
as
well
as
a
NAS
Drive. However,
you want to stream your music, Audiolab's Omnia will deliver outstanding
performance.
The Omnia features analogue and digital audio circuitry
of
the highest quality and
has
been designed by engineers who are passionate about the reproduction
of
music, and we hope you will enjoy its performance
for
many years to come.
Please
read through this manual to obtain the very best performance from your
Omnia.
Features
CD
playback
Full
DAC
and preamp facilities
High-performance phono pre-amp
Analogue and digital source connectivity
Bluetooth aptX receiver
Powerful stereo amplification
Dedicated headphone amplifier
Hi-res streaming
via
Wi-Fi
or
Ethernet
Major streaming service support (Spotify, Tidal, Qobuz, Amazon and more!)
Internet
Radio
Multi-room compatibility
800 x 480mm
WVGA
full view
IPS
LCD
Inputs
Three analogue line-level inputs
One phono input {MM)
One power-amp input
Two coaxial
SPDIF
digital inputs
Two optical
SPDIF
digital inputs
CD
playback compatible with
CD,
CD
-
R,
CD-RW
discs
USB
2.0
port
for
replaying stereo from a compatible host
Outputs
Pre-amplifier output
Loudspeaker output
Headphone output
Unpacking
the
Equipment
The
carton should contain:
The
Audiolab Omnia
One
IEC
power cord suitable
for
your area
One remote handset
One instruction manual
Please note: The remote control requires 2 x
AAA
type batteries.
Due
to
international shipping and courier regulations with Lithium-Ion batteries, the
remote controller battery
is
not included in this package.
Consult the dealer from whom you purchased the equipment
if
any item
is
not
present. Carefully unpack the unit and accessories. Take care not to damage the
surface finish when undoing the protective polythene sleeve. Retain the packing
materials
for
future use. Retain the user manual and information concerning the
date and place
of
purchase
of
your
equipment
for
future reference.
If
you transfer
the unit to a third party, please
pass
on this instruction manual along with the
equipment.
Placement
The unit must
be
mounted on a solid, level and stable surface.
Before you connect the Audiolab Omnia to the
AC
mains power, ensure your
AC
mains voltage corresponds to the rating on the rear panel
of
the product.
If
in
doubt, consult
your
dealer.
If
you move to
an
area
that
has
a different mains
voltage, seek advice from
an
Audiolab appointed dealer
or
a competent service
technician.
To Next Page
Loading...
Need help?
General
