AUMA SA 25.1 - Default Chapter; Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting ) of actuator controls AC 01.2 HART
●
Manual (Fieldbus device integration) of actuator controls AC 01.2 HART
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
61. Safety instructions.................................................................................................................
61.1. Basic information on safety
61.2. Range of application
71.3. Applications in Ex zone 22 (option)
71.4. Warnings and notes
81.5. References and symbols
92. Identification...........................................................................................................................
92.1. Short description
102.2. Name plate
143. Transport, storage and packaging........................................................................................
143.1. Transport
153.2. Storage
153.3. Packaging
174. Assembly................................................................................................................................
174.1. Mounting position
174.2. Handwheel fitting
184.3. Multi-turn actuator: mount to valve/gearbox
184.3.1. Output drive type A
194.3.1.1. Stem nut: finish machining
204.3.1.2. Multi-turn actuator (with output drive type A): mount to valve
214.3.2. Output drive types B and E
214.3.2.1. Multi-turn actuator with output drive types B: mount to valve/gearbox
224.4. Accessories for assembly
224.4.1. Stem protection tube for rising valve stem
234.5. Mounting positions of local controls
244.5.1. Mounting positions: modify
255. Electrical connection.............................................................................................................
255.1. Basic information
275.2. Electrical connection of actuator controls
275.2.1. S/SH/SD electrical connection (AUMA plug/socket connector)
2
SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
Table of contents AC 01.2 Intrusive HART