AUMA SA 25.1 - Page 3

285.2.1.1. Terminal compartment (for mains connection): open
295.2.1.2. Cable connection
315.2.1.3. Terminal compartment (for mains connection): close
325.2.1.4. HART terminal compartment: open (version with HART connection board)
335.2.1.5. HART cables: connect
355.2.1.6. HART terminal compartment: close (version with HART connection board)
355.3. Electrical connection of actuator
365.3.1. Motor connection
365.3.1.1. Motor connection compartment: open
375.3.1.2. Motor cables: connect
385.3.1.3. Motor connection compartment: close
395.3.2. S/SH electrical connection (AUMA plug socket connector)
395.3.2.1. Terminal compartment: open
405.3.2.2. Cable connection
415.3.2.3. Terminal compartment: close
425.4. Accessories for electrical connection
425.4.1. Actuator controls on wall bracket
435.4.2. Connection with control box
455.4.3. Parking frame
455.4.4. DS intermediate frame for double sealing
465.4.5. External earth connection
476. Operation................................................................................................................................
476.1. Manual operation
476.1.1. Engage manual operation
486.1.2. Manual operation: disengage
486.2. Motor operation
486.2.1. Local actuator operation
496.2.2. Actuator operation from remote
496.3. Menu navigation via push buttons (for settings and indications)
506.3.1. Menu layout and navigation
516.4. User level, password
526.4.1. Password entry
526.4.2. Password change
536.5. Language in the display
536.5.1. Language change
557. Indications..............................................................................................................................
557.1. Indications during commissioning
557.2. Indications in the display
567.2.1. Feedback indications from actuator and valve
587.2.2. Status indications according to AUMA classification
597.2.3. Status indications according to NAMUR recommendation
617.3. Indication lights of local controls
627.4. Optional indications
627.4.1. Mechanical position indication via indicator mark
638. Signals (output signals).........................................................................................................
638.1. Signals via HART
638.2. Status signals via output contacts (digital outputs)
638.2.1. Assignment of outputs
638.2.2. Coding the outputs
3
SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
AC 01.2 Intrusive HART Table of contents