AUMA SA3 - 11 Checklists; Commissioning Checklist; Proof Test Checklists; Safe ESD Safety Operation (Safe OPENING;CLOSING)

39
11 Checklists
11.1 Commissioning checklist
Information
Table 16: Commissioning checklist
11.2 Proof test checklists
If the proof test is performed according to proof test checklists, the pertaining NOTICES
contained in the <Tests and maintenance> chapter have to be observed.
11.2.1 Safe ESD safety operation (Safe OPENING/CLOSING)
Information
Proof test checklist for version or configuration:
• Safe ESD function “Safe CLOSING” (Safe ESD in direction CLOSE)
• Safe ESD function “Safe OPENING” (Safe ESD in direction OPEN)
• Irrespective of type of seating
Also, valid for combination of Safe ESD with Safe STOP.
Table 17: Proof test checklist
11.2.2 SIL fault signal “Actuator monitoring”
Proof test checklist for version or configuration:
• Safe ESD function “Safe CLOSING” (Safe ESD in direction CLOSE)
• Safe ESD function “Safe OPENING” (Safe ESD in direction OPEN)
• Irrespective of type of seating
Also, valid for combination of Safe ESD with Safe STOP.
Multi-turn actuators
SA series with Control 3.XX /NI/SIL