Information Status signals via fieldbus are not part of a safety function! They may not be integrated
in a safety-related system. They can be used as additional information on the
standard PLC, for example.
Signals available in process representation:
Bit: Safe ESD
Bit: Safe STOP
Bit: SIL fault
Bit: SIL function active
For further information on parameter configuration via fieldbus interface refer to
Manual (Device integration fieldbus).
22
Multi-turn actuators
Signals SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2
To Next Page
Loading...
