AUMA SAR 10.1 User Manual

215.2.3 Terminal compartment: close
215.2.4 Bus terminal compartment: open
225.2.5 Bus cables: connect
255.2.6 Bus terminal compartment: close
255.3. Accessories for electrical connection
255.3.1 Controls mounted to wall bracket
265.3.2 Parking frame
275.3.3 Protection cover
275.3.4 Double sealed intermediate frame
275.3.5 Earth connection, external
286. Operation................................................................................................................................
286.1. Manual operation
286.1.1 Manual operation: engage
286.1.2 Manual operation: disengage
296.2. Motor operation
296.2.1 Local operation
306.2.2 Operation from REMOTE
306.3. Menu navigation via push buttons (for settings and indications)
316.3.1 Short overview: Functions of the push buttons
316.3.2 Structural design and navigation
326.4. Password entry
326.5. Language change in the display
347. Indications..............................................................................................................................
347.1. Status indications in the display
347.1.1 Status indication S0/S6 - operation
357.1.2 Torque indication: edit
357.2. Indication lights/LEDs
367.3. Mechanical position indicator/running indication
378. Signals.....................................................................................................................................
378.1. Signals via fieldbus
378.2. Feedback signals via output contacts (binary)
378.3. Feedback signals (analogue)
389. Commissioning (basic settings)...........................................................................................
389.1. Heat-up time for low temperature version
389.2. Type of seating: check/edit for end positions
429.3. Baud rate, parity and bus addres (slave addess): set
459.4. Further parameters of the Modbus interface
459.5. Switch compartment: open
469.6. Torque switching: set
469.7. Limit switching: set
479.7.1 End position CLOSED (black section): set
479.7.2 End position OPEN (white section): set
489.8. Intermediate positions: set
489.8.1 Running direction CLOSE (black section): set
489.8.2 Running direction OPEN (white section): set
499.9. Test run
499.9.1 Direction of rotation: check
509.9.2 Limit switching: check
509.9.3 Reference operation position feedback: perform
3
SA 07.1 – SA 16.1/SAR 07.1 – SAR 16.1 Control unit: electromechanic
AC 01.1 Intrusive Modbus RTU Table of contents

AUMA SAR 10.1 Specifications

General

Brand	AUMA
Model	SAR 10.1
Category	Controller
Language	English