AUMA SAR 10.1 User Manual

519.10. Potentiometer setting
519.11. Electronic position transmitter RWG: set
529.12. Mechanical position indicator: set
539.13. Switch compartment: close
5410. Corrective action....................................................................................................................
5410.1. Faults during commissioning
5410.2. Fault indications and warning indications
5510.2.1 Status indication S0 - faults and warnings
5510.2.2 Status indication S1 - faults
5610.2.3 Status indication S2 - warnings
5710.2.4 Status indication S3 - causes for not ready remote
5710.3. Fuses
5710.3.1 Fuses within the actuator controls
5810.3.2 Motor protection (thermal monitoring)
6011. Servicing and maintenance...................................................................................................
6011.1. Preventive measures for servicing and safe operation
6011.2. Maintenance
6111.3. Disposal and recycling
6212. Technical data.........................................................................................................................
6212.1. Features and functions of actuator
6312.2. Features and functions of actuator controls
6612.3. Modbus interface
6712.4. Service conditions
6812.5. Accessories
6812.6. Further information
6913. Spare parts.............................................................................................................................
6913.1. Multi-turn actuators SA 07.1 – SA 16.1/SAR 07.1 – SAR 16.1
7113.2. Actuator controls AUMATIC AC 01.1 with AUMA plug/socket connector (SD bus)
7314. Certificates..............................................................................................................................
7314.1. Declaration of Incorporation and EC Declaration of Conformity
7615. Index........................................................................................................................................
78Addresses...............................................................................................................................
4
SA 07.1 – SA 16.1/SAR 07.1 – SAR 16.1 Control unit: electromechanic
Table of contents AC 01.1 Intrusive Modbus RTU

AUMA SAR 10.1 Specifications

General

Brand	AUMA
Model	SAR 10.1
Category	Controller
Language	English